Master Bushing 37.5" - Latch Type Master Bushing 37.5" - Square Type Master Bushing 37.5" - EMSCO Master Bushing 27.5" - Solid Type New   Master Bushing 27.5" - Split Type Master Bushing 27.5" - Taper Design Master Bushing 27.5" - Square Drive Master Bushing 20.5" - Pin Drive Casing Bushings Roller Kelly Bushing Manual Tong

Drill Pipe Slips

Drill Collar Slips

Casing Slips

Flexible Handles

Spring Loaded Power Slips

Pneumatic Power Slips

Hydraulic Power Slips

Safety Clamps

Slip Bowls

Umbilical Bowls

RHS Rotary Slip

Casing tong

Pneumatic Spider

Tong Dies

Load Cell


Contact Us

spring-loaded-power-slips , autobahn industries, autobahnindustries.com

Spring Loaded Powerslip
Model: ABSPS-27

Autobahn make Spring Loaded Power Slip (equvilant to Varco PS15) is footoperated, designed to protect drill pipes and tubing with slip range from 3½” to 4½” and 4½” to 5½” while setting and releasing by simply changing inserts. The slip can be set simply by applying foot pressure on the slip set ring. This eliminates the manual setting and lifting of slip. The unit consists of four slip segments with inserts and four coil spring cartridges as a counter balance to offset the weight of slips when in the upper released position. It is suitable to fit into 27½” and 37½” to 49½” Rotary table with API Pin Drive Master Bushing.

The unit consists of three major assemblies as under:

1. Top Cover Assembly

Top cover assembly is ergonomically designed with two halves with slip set ring. Top cover assembly is mounted on four slip hangers with pins.

2. Slip Assembly

Four slip segments of 16½” grip length for gripping the tubular size 4½” to 5½” are dressed with 48 Nos Inserts, 4 Nos Insert Retaining Ring and 8 Nos Allen Screw.

3. Bowl Assembly

Bowl assembly consists of two halves connected with bowl hinge pin to enable the installation and removal of the power slip from the Master Bushing. Bowl assembly is provided with four numbers of Coil Spring Cartridges and Foot Pedal for releasing the slips.

Download Detailed PDF