PNEUMATIC SPIDER

Master Bushing 37.5" - Latch Type Master Bushing 37.5" - Square Type Master Bushing 37.5" - EMSCO Master Bushing 27.5" - Solid Type New   Master Bushing 27.5" - Split Type Master Bushing 27.5" - Taper Design Master Bushing 27.5" - Square Drive Master Bushing 20.5" - Pin Drive Casing Bushings Roller Kelly Bushing Manual Tong

Drill Pipe Slips

Drill Collar Slips

Casing Slips

Flexible Handles

Spring Loaded Power Slips

Pneumatic Power Slips

Hydraulic Power Slips

Safety Clamps

Slip Bowls

Umbilical Bowls

RHS Rotary Slip

Casing tong

Pneumatic Spider

Tong Dies

Load Cell




×

Contact Us




pneumatic-spider

PNEUMATIC SPIDER

AUTOBAHN make tubing spider are pneumatic operated as per API-7K specification. Spider with slips can accommodate tubing sizes from 1.315” to 8.5/8” and available in capacity upto 100T, 125T & 200T, made from high grade of alloy steel duly hardened and tempered with controlled hardness.
Spider is operated through foot remote control valve during tripping the string. The slip assemblies are machined as matched sets and incorporate inserts which provide full 360° of contact with the pipe.
The main purpose of Tubing Spider is to support the tubing string when it is lowered into or raised from the well bore of an oil or gas well. Pneumatic Spider are designed to used in snubbing operations also.
Spiders may be used on a rotary table with an adapter plate that fits into the square drive or pin drive master bushing, centring the Spider on the rotary table.


Model Rate Capacity (upto) Slip Body Size (In Inch) OD of tubular (In Inch)
C 100 Tons

4.3/4 (Integral)
5 (Integral)
5½ (Integral)
1.315 – 3½
3½ – 4½
4.3/4
5
CHD 125 Tons

4.3/4 (Integral)
5 (Integral)
5½ (Integral)
1.315 – 3½
3½ – 4½
4.3/4
5
E 200 Tons

7
7.5/8 (Integral)
8.5/8 (Integral)
2.3/8 to 3½
4 to 5½
5½ to 7
7.5/8
8.5/8