HYDRAULIC POWER SLIP

Master Bushing 37.5" - Latch Type Master Bushing 37.5" - Square Type Master Bushing 37.5" - EMSCO Master Bushing 27.5" - Solid Type New   Master Bushing 27.5" - Split Type Master Bushing 27.5" - Taper Design Master Bushing 27.5" - Square Drive Master Bushing 20.5" - Pin Drive Casing Bushings Roller Kelly Bushing Manual Tong

Drill Pipe Slips

Drill Collar Slips

Casing Slips

Flexible Handles

Spring Loaded Power Slips

Pneumatic Power Slips

Hydraulic Power Slips

Safety Clamps

Slip Bowls

Umbilical Bowls

Bit Breakers

Bit Gauges

Mud Bucket

Tong Dies

Load Cell




×

Contact Us




hydraulic-power-slips

Hydraulic Powerslip
Model: ABHPS-27


Autobahn make Hydraulic Power Slip is a fully automatic, remote controlled, hydraulic operated power slip designed for setting and releasing of drill pipe & tubing with slip range from 3-1/2" to 4-1/2" and 4½” to 5½” by simply changing of inserts. Slip suitable for 27½” / 37½”- 49½” Rotary Table equipped with API Pin Drive Master Bushing. Slip designed with dedicated rating and safety factors gives optimal performance and high safety in operations. Power slip is set by gravity plus applied hydraulic pressure and released by applied hydraulic pressure. Slip can be controlled either by hand lever or remote control.

The unit consists of five major assemblies as under:-

1. Top Cover Assembly :

The top cover assembly is designed in two halves. The flat, top surface is designed to accommodate TDS elevators while drilling to the floor. The rod ends of the two hydraulic cylinders connect the top of the cover assembly with ball floating joint fitted with hex-head screws. Top cover assembly is having four clevises for mounting slip assembly hangers and two holes which accommodate the guide rods.

2. Slip Assembly

Four slip segments of 16½” grip length for gripping the tubular sizes are dressed with 48 no. inserts, 4 no. Insert Retaining Ring and 8 nos. Allen screw.

3. Bowl Assembly

The bowl assembly consists of two halves connected with a bowl hinge pin to enable the installation and removal of the power slips from Master Bushing. Two guide rods and two hydraulic cylinders are connected to the top cover assembly to provide stability.

4. Hydraulic Cylinders Assembly :

Assembly consists of two double acting hydraulic cylinders to lift the top cover assembly with slip assembly, approximately 8- 1/2" on the application of designed pressure. The hydraulic cylinders are fitted in bowl body. Corrosion resistant SS guide rod and floating ball joint are also provided to support the hydraulic cylinders.

5. Control System :

Control unit can be located in the driller's console, enable the driller to operate the slips. The control system consists of Pump, Filter, Pressure Gauge, Oil level indicator, flow control valve etc.

Download Detailed PDF